Esox Mag Panel/Gauges
thescottith
Posted 5/11/2015 11:47 AM (#768434)
Subject: Esox Mag Panel/Gauges




Posts: 444


All the Gauges are out on the Esox Magnum I just bought.
Bought it knowing this and figured it would be an easy fix.
I'm going to try and look at it this week, I was figuring it must be a main harness as the fuse is good.
Any one have any experience with this issue? any insight?

Thanks

SK
sworrall
Posted 5/11/2015 3:54 PM (#768454 - in reply to #768434)
Subject: Re: Esox Mag Panel/Gauges





Posts: 32930


Location: Rhinelander, Wisconsin		The gauge panel except for the speedo which should connect to the motor pitot tube should connect to the outboard through the outboard harness. Power comes from the motor.

Switches are from the battery, there should be a small gauge red and black wire at the battery for that purpose.
thescottith
Posted 5/14/2015 11:40 AM (#768778 - in reply to #768454)
Subject: Re: Esox Mag Panel/Gauges




Posts: 444


Thanks Steve.
I think i can figure it out quick, hopefully.
What would be the chances of getting a wiring diagram or a schematic?

SK
sworrall
Posted 5/14/2015 12:30 PM (#768785 - in reply to #768434)
Subject: Re: Esox Mag Panel/Gauges





Posts: 32930


Location: Rhinelander, Wisconsin		The wiring diagram you will need is from the motor.
thescottith
Posted 5/15/2015 8:14 AM (#768883 - in reply to #768785)
Subject: Re: Esox Mag Panel/Gauges




Posts: 444


Ahhh....I got some diagrams for the motor online.
Thanks again, you saved me some time.

sk