Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )

Random quote: "How long before that 25 bucks is in a tree or stuck on the bottom ?" My wife at the Musky show.

Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

More Muskie Fishing -> Basement Baits and Custom Lure Painting -> Wood Lathe Advice
 
Message Subject: Wood Lathe Advice
Veithr3293
Posted 10/13/2014 9:26 PM (#734849)
Subject: Wood Lathe Advice




Posts: 192


I finally got a Lathe and I'm needing a little advice to get started. Anyone have any pointers
Trophyseeker50
Posted 10/13/2014 9:57 PM (#734857 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 791


Location: WI
Hey Ryan. Been turning for about 15 years. What kinda advice are you looking for ?
Veithr3293
Posted 10/14/2014 3:48 AM (#734869 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


What kind of wood do you prefer and what kinds of tools do i need for rounding the head of a lure.
spoonpluggergino
Posted 10/14/2014 4:43 PM (#735005 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 321


Location: Glen Ellyn Il
I make muskier size Bombers and I use Poplar from Home Depot easy to work with, also square stock from red cedar would work. For tools I purchased a set of turning knifes from Harbor Freight the all set was under 50.00, they are not the best but they are working fine for me, I do not turn hard wood. with them
Gino
Trophyseeker50
Posted 10/14/2014 5:44 PM (#735011 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 791


Location: WI
I use cedar for all of my topwaters. I prefer to turn hard woods but they are not conducive to making topwaters. You will need a roughing gouge, a thumbnail gouge for detail and a parting tool for making shoulders. You can get a number of starter sets. I mean no offense to Gino but wouldn't cheap out on tools. The difference in price mostly has to do with the type of steel used for the tool. You get what you pay for. If you can I would look at a carbide. You pay for it but they basically eliminate sharpening your tools.

For lures this day I use a duplicator with a carbide cutter. Bit that is for putting out numbers. For every thing else ( one offs , tool handles , bowls , ect. I use a set of tools bought at woodcraft.
spoonpluggergino
Posted 10/15/2014 9:38 AM (#735095 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 321


Location: Glen Ellyn Il
No offence takenTrophyseeker50, thanks for sharing. I just build muskie baits as a hobby, someday I will buy a set of Sorby turning gouges, now that I kind know what I am doing
Thank You
Gino
Veithr3293
Posted 10/15/2014 9:03 PM (#735203 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


Any images of your work?
spoonpluggergino
Posted 10/15/2014 9:40 PM (#735213 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 321


Location: Glen Ellyn Il
Veithr3293 if you are asking me Gino, yes I have posted baits over the years and some very recently. do a search on spoonpluggergino and you will find baits that I have done on a lathe Large Bombers up to 10 inches, also I made bunch of glide baits
Gino
Veithr3293
Posted 10/19/2014 10:19 PM (#735705 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


I have a couple blanks made up now. What way do either of you prefer to seal your baits before painting?
spoonpluggergino
Posted 10/20/2014 12:17 PM (#735772 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 321


Location: Glen Ellyn Il
I use a all bunch of stuff, but there are two I use more often Deft sanding sealer, saltwater guys use it. Dip in Deft let it dry and light sanding. I also use Devcon-2 ton 30 minutes, thinned out with denatured alcohol, brush it on.
Both work great I like Deft because it dryes in about 20 minutes, it's fast
I purchase Deft at Amazon.com, sometime you may find it at Lowes
Deft I do 3 coats Devcon 2 coats
Gino
Veithr3293
Posted 10/20/2014 5:42 PM (#735823 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


How much denatured alcohol do you use when using the devcon 2 ton epoxy?
spoonpluggergino
Posted 10/20/2014 9:31 PM (#735867 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 321


Location: Glen Ellyn Il
About 6 drops of alcohol to 3 ml. of hardener and resin mix, just enough to thin out the mix. There is no fixed amount, you do not want it to runny. After a while you will know. I never had a problem even if is made too thin. Make sure the amount of resin and hardner is the same by volume. I use syringes from Flex coat you can purchase from Jan net craft or Mud Hole.
For clear top coat the best for me is Flex Coat it's more expensive than other clear top coat but very easy to work, and has beautiful clear finish
Here is a list that I use for clear topcoat
A Flex Coat Mud Hole and Jan Net Craft
B Thinned out Dervcon 2-ton 30 minute
C Envirotex lite Menard has it
D Parks clear coat at Home Depot
Glad to be of help
Gino


Edited by spoonpluggergino 10/20/2014 9:33 PM
spoonpluggergino
Posted 10/20/2014 10:10 PM (#735879 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 321


Location: Glen Ellyn Il
I almost forgot
If you do not have a way to turn your baits once is clear coated, than use Devcon 2-ton and just flip your baits the first 30 minutes couple of times. You can build a bait turning wheel using a rotisserie motor
Gino
Veithr3293
Posted 10/21/2014 6:51 PM (#735997 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


Im almost ready to dive in but one more question I have drilled a hole through the center of the lure and one for the hook ive work with epoxy before and am wondering if just fill the whole with epoxy or if there is a sealer with more of a liquid property that i could just dunk the lure in and have it soak up?
DMJones
Posted 10/23/2014 5:13 PM (#736366 - in reply to #734849)
Subject: RE: Wood Lathe Advice




Posts: 43


Location: Central IA
I have yet to make a lure but I've been turning about 10 years You will never regret getting the best turning tools you can afford A good sharpening system is a great investment as well. Also always wear a full face shield. A chunk of wood flung from the lathe is pretty scary. I look forward to seeing your work.
kodiak
Posted 10/27/2014 7:55 AM (#736991 - in reply to #734849)
Subject: Re: Wood Lathe Advice





Posts: 1224


Location: Okoboji
get a speed controller for your lathe and turn the bait on there after sealing and topcoating. also get a set of mini carbide turning tools.

super slow

Edited by kodiak 10/27/2014 7:56 AM
Veithr3293
Posted 10/27/2014 5:57 PM (#737160 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


Kodiak how would I do such a thing to my wood lathe? Seems like a great idea I just wouldn't know where to start with that kind of modification.
Veithr3293
Posted 10/28/2014 7:38 PM (#737435 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


Time for some results here is a link to the first lure I made on my lathe the overall length is about 7 inches

http://s1304.photobucket.com/user/veithr3293/media/IMG_3573_zpsf596...
psv
Posted 10/28/2014 7:51 PM (#737444 - in reply to #734849)
Subject: RE: Wood Lathe Advice




Posts: 469


Location: MN

Ryan,

Great looking lure for first time.

Let me post the picture for you:

 

 

Veithr3293
Posted 10/28/2014 8:36 PM (#737458 - in reply to #734849)
Subject: Re: Wood Lathe Advice




Posts: 192


Thanks Archie threw it a couple times runs great sounds even better
Jump to page : 1
Now viewing page 1 [30 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)