|
|
Posts: 51
Location: Between a 10wt fly rod and a XH dawg rod | Any body have any advice on where to obtain the prop for topwater baits? All I can find is the "tallywacker" prop from lureparts.com and rollie and helens and was wondering if there were other options here. Thanks |
|
|
|
| your probably going to have to make your own unless you can find a bait company willing to sell you some of theirs. If you have a band saw, its easy. But look at the price of brass sheets. ouch!. Stainless has to be stamped with a die (pricey) or water jet so its basically a high cost as well and companies willing to do it want you to buy thousands of them to make it worth their while. |
|
|
|
Posts: 10
| Try Metalworks Stamping Corp. Dale is a good guy to work with www.metalworksstamping.com |
|
|
|
Posts: 50
| Moore's Lures probably has some. Reinke Bros in Milwaukee carries metal and plastic props as well |
|
|
|
Posts: 51
Location: Between a 10wt fly rod and a XH dawg rod | Thanks guys, I was thinking that I would either have to make one or "know a guy." Thanks for the info |
|
|
|
Posts: 360
| https://www.muskyshop.com/modules/cart/products.php/nav_id/5/page/4/... |
|
|