Muskie Discussion Forums

Forums | Calendars | Albums | Quotes | Language | Blogs Search | Statistics | User Listing
You are logged in as a guest. ( logon | register )
Moderators: Slamr

View previous thread :: View next thread
Jump to page : 1
Now viewing page 1 [30 messages per page]

Muskie Fishing -> Muskie Boats and Motors -> Minn Kota terrova output tube liner replacement
 
Reply New post
Message Subject: Minn Kota terrova output tube liner replacement
Chain Gang
Posted 3/25/2015 4:04 AM (#761323)
Subject: Minn Kota terrova output tube liner replacement




Posts: 489


Has anyone ever replaced the part that locks the shaft into place on a terrova? It is the collar on the shaft that has the notch that the adjustable depth collar fits in to? I am wondering how hard this is going to be to do with moderate mechanical abilities. The notch on mine has a pice broken out on the lower collar so it makes it more difficult to control my motor. I believe it's part 415 on the schematic called the output tube liner

Edited by Chain Gang 3/25/2015 4:10 AM
kjgmh
Posted 3/25/2015 7:59 AM (#761339 - in reply to #761323)
Subject: Re: Minn Kota terrova output tube liner replacement





Posts: 1081


Location: Hayward, WI
Do search on Youtube for installing a down image transducer on a Terrova. It will show you how to replace this collar. Not very hard to do.
rich
Posted 3/27/2015 1:04 PM (#761758 - in reply to #761339)
Subject: Re: Minn Kota terrova output tube liner replacement




Posts: 133


Walleye Central has a video on how to get to the collar.
George W
Posted 3/28/2015 6:39 PM (#762000 - in reply to #761323)
Subject: Re: Minn Kota terrova output tube liner replacement




Posts: 27


Location: SW Ohio
It's easy... first unplug the trolling motor. Next, remove the head cover and unplug the red and black power cables and universal sonar cable (if applicable) inside the head (if you have universal sonar). After your disconnected, remove the bottom half of the head cover, slide off old collar and install new collar, then reassemble.

Nevermind... just realized you were talking about the collar on the steering housing.

Edited by George W 3/28/2015 7:29 PM
Jump to page : 1
Now viewing page 1 [30 messages per page]
Reply New post
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)